Plastic woven bag specification size normal range tolerance

For plastic woven bag manufacturers know that the size we refer to refers to the size of the woven bag snakeskin bag, such as a woven bag size is 50 * 80, woven bag manufacturers refer to 50 * 80 cutting, remove the seam The bottom is 2 to 3 cm, and the finished product size is 50*77. For woven bag consumer customers, the size is generally 50*80 after the bottom of the seam is the finished product size. To achieve 50*80, according to the above statement, the woven bag manufacturer has to cut 50*83. Moreover, there is no machine bottom specification in the artificial seam bottom. Therefore, if the woven bag is wider than 60, that is, the width is less than or equal to 60, the width of the seam bottom must be 2 to 3 cm. If the width is greater than 60, such as 70 or 80 or more, Leave 4 to 5 cm for the bottom of the seam. Generally, the longer the woven bag, the harder it is to sew the bottom. Of course, the longer the length of the worker's seam is, the more expensive it is. If it is the back cover of the machine, it will save a lot of trouble. It will be fixed according to the size of the woven bag, which can be produced according to the customer's requirements. We need to understand this when weaving bags are customized. The error of 2-3 cm is inevitable, so the woven bag consumer customers should clearly understand the reasons, so as to avoid unnecessary troubles in production delivery.