Solution to the concave and convex of woven bag

In the production process of woven bags, the drying speed of ink needs to be accelerated, and the printing speed needs to be slowed down, so as to effectively prevent ink from sticking together to form tea phenomenon. Personnel form a good cycle alternately. In addition, the newly printed plastic woven bags cannot be stacked and placed. Pay attention to inspection when purchasing plastic woven bags, which will not affect its quality.
There is also a need to pay attention to the production method of the woven bag, which can also solve the problem. For example, in the production process, attention should be paid to the equality of the resistance between the flat wire and each guide wire hole, which requires careful calculation of the angle and the total length of all guide wire holes of each flat wire to be equal, so that the concave and convex is well solved. Then there is the temperature control. If the temperature is too high, it will cause concave and convex. Therefore, some manufacturers of woven bags may not have this problem, but for manufacturers of woven bags, the production environment is a problem to know at the beginning, and dust in the production process will not affect it. In the subsequent weaving cutting, printing and other processes, the dust will be removed, but the raw material itself will have this kind of fluff which cannot be shaken off. We suggest that you buy as few bags as possible with this kind of wool. If necessary, it may be much better to use it lightly in industry or transportation.