Current location:
Home > News
>
Industry information
>
Plastic woven bags to avoid direct sunlight
Date:2017-01-12
Click:0
We often see in the packaging box to avoid direct sunlight when stored. This is a kind of plastic bags are not suitable for direct sunlight products, Linyi woven bags under the direct sunlight is easy to aging, shorten the service life of the bag.
Linyi woven bag manufacturers have done experiments, Linyi bags in the natural environment is in the condition of direct sunlight a week later, the intensity of 25% will be reduced by 40% after two weeks, is reduced, basically can not be used.
That is to say, it is very important for the storage and storage of woven bags. In addition, in plastic woven bags of cement in the open air environment under direct sunlight, the intensity will decline sharply; high temperature during storage and transportation (container) or rain, resulting in lower intensity, quality requirements can not reach the protection of the contents. The woven bag transport and storage conditions are very important.
So Linyi bags should be kept in a cool and clean indoor storage, transportation should avoid the sun and rain, not near the heat source, the storage period shall not exceed 18 months. In fact, 18 months bag may aging, so Linyi should shorten the validity of woven bags, 12 months.

Recommended Products
同类文章排行
- What is a square bottom valve pocket
- The role of woven bag printing
- What are the raw materials of woven bags
- The characteristics and scope of application of valve pockets
- 20 details of plastic woven bag coating operation
- Introduction to the problem of printing code on plastic woven bags
- just woven bag printing, play a key role
- Why do woven bags cause waste when coating films
- PP woven bags storage and application.
- Repairing technique for damage of the jumbo bag
******资讯文章
- How to improve the quality of woven bags
- Sewing method of woven bag seam
- Introduction to the market of woven bags
- Printing classification of woven bags
- Solution to the problem of ink adhesion in woven bags
- Placement and maintenance of plastic woven bags
- Factors affecting the quality of woven bags
- How did the name of the woven bag come from?
- Introduction to the problem of printing code on plastic woven bags
- Sealing principle of valve pocket
Similar articles ranking
- Factors affecting the sewing quality of woven bags
- How to solve the concave and convex phenomenon of plastic woven bags
- Introduction of plastic flat wire drawing unit of woven bag production equipment
- What kind of woven bags can be as "green woven bags"
- FFS FILM
- How to choose craft plastic woven bags
- Woven bag stitching method
- Sewing method of woven bag seam
- Jumbo/Bulk bag precautions
- Thermal convection drawing principle of flat filament of woven bag
The latest news article
- How to improve the quality of woven bags
- Sewing method of woven bag seam
- Introduction to the market of woven bags
- Printing classification of woven bags
- Solution to the problem of ink adhesion in woven bags
- Placement and maintenance of plastic woven bags
- Factors affecting the quality of woven bags
- How did the name of the woven bag come from?
- Introduction to the problem of printing code on plastic woven bags
- Sealing principle of valve pocket