What are the requirements for the appearance of FFS multi-layer co-extruded heavy-duty film?

 1. There must be no influence on the use of bubbles, perforations, cracks, gluten, plasticization, water marks, clouds, streaks, fish eyes, stiff blocks, impurities, wrinkles, scratches, and pollution.
2, printing patterns, text, markings, etc. should be clear, firm, and accurate.
3, the film surface requires embossing, embossing touch is obvious.
4, the number of membrane coil joints does not exceed 1, the joint should be clearly marked.
Our company Anhui Tianda Environmental Protection New Materials Co., Ltd. (formerly Anhui Tianda Plastic Composite Products Co., Ltd.) has 6 imported blow molding production lines with an annual output of 15,000 tons of three-layer co-extruded LDPE film. The main customers have new materials. Technology Co., Ltd., Inner Mongolia Junzheng Energy Chemical Group Co., Ltd., China Coal Group, Sinochem Group, Total, Wacker, Zhongyan Group, Sinopec Group, Wanhua Group, Yangzijiang Petrochemical Co., Ltd., Taiwan Rubber Co., Ltd., DSM, Covestro Polymers (China) Co., Ltd., Teijin, etc. Please contact me by phone.
Contact Shen Lean, telephone (WeChat with the same number): 139 5628 6204, QQ: 72879 6526, email sla0901@td-sf.com.